Load data for .22 Rem. Jet Mag. + .224 | 38gr | Lehigh Defense Controlled Chaos

Recommended Powder(s): none

Load Specifications

(Use the Personalized Load Calculator below to adjust )

Bullet:	.224 \| 38gr \| Lehigh Defense Controlled Chaos
Manufacturer SKU:	224038CuSP
Bullet Weight:	38gr \| 2.5g
Bullet Diameter:	0.224" \| 5.69mm
Bullet Length:	0.620" \| 15.7mm
Caliber:	.22 Rem. Jet Mag. load data
Case Length (l3):	1.278" \| 32.5mm
Cartridge Length (C.O.L.):	1.635" \| 41.5mm
Seated Depth:	0.263" \| 6.7mm
Shank Seated Depth:	0.220" \| 5.6mm
Case Capacity:	18.5 Grains of Water \| 1.20 cm³
Primer Size:	Small Pistol (SP)
Max. allowed Pressure:	36985 psi \| 2550 bar
LID:	LID_B10999_C89
Last updated:	2025-11-04
Recommended Twist Rate:	1:11 - 1:10

Load data for 54 loads in caliber .22 Rem. Jet Mag. with .224 | 38gr | Lehigh Defense Controlled Chaos bullet and 27 powders such as none. The key underlying parameters are shown in the table above.

Important Notice: DO NOT go below Minimum Charge or above Maximum Charge unless there are reasons. Since xxlreloading.com has no control over the equipment and components used by the customer and the data used in connection with the website, any responsibility and liability for the results achieved is rejected. Also see our Terms of Service.

Questions regarding the load data: Please read the information in the next tab "Explanations".
A load must fulfill certain criteria to be listed in the default view below - see "powder criteria to fulfill to be listed".

Our load data might deviate from other sources - see the "most common reasons for deviations".

All loads are based on the bullet and case dimensions shown under "Load Specifications" - see "reloading suggestions" if you deviate.

You can set your specifications in the "Personalized Load Calculator".

Go to the bottom of the "Dashboard " page to set the measure system (imperial vs. metric)
No data yet
C.O.L. (Inch)
C.O.L. (mm)
We recommend you limit powder range to relevant brands to speed up re-calculation of results
Use the Personalized Load Calculator to customize loads to your own specific requirements. Find more details in the help section.

Our default view only displays powders/loads that fulfill certain criteria: Max pressure of a load <=90% of Max. Standardized Pressure. Fill Rate (Min FR): >80% and <100% for rife loads, >60% and <100% for pistol loads. Min. Propellant Combustion (Min z): >90% for rifle loads , >80% for pistol/revolver loads. Relax these criteria at your own risk to potentially get more powders shown in the load tables.
Case Length (Inch)
Case Length (mm)
CaseCapacity (GoW)
Min z (%)
Min FR (%)
Max FR*
Barrel Length (Inch)
Barrel Length (cm)
Safety Buffer (%)
.

Click on the desired row in the tables below to add a specific load / powder to your Diary and manage there.

Powder	Charge	FR	MaxP	%	V(0)	z
ADI AP 100	<<locked>>	75%	32996	89%	**03	98%
ADI APS 450	<<locked>>	63%	33257	90%	**21	100%
[Accurate No. 9]*	<<locked>>	65%	33272	90%	**46	86%
Accurate Solo 1250	<<locked>>	63%	32996	89%	**65	100%
[Accurate TCM]*	<<locked>>	65%	33054	89%	**23	87%
[Alliant 2400]*	<<locked>>	73%	32808	89%	**36	82%
Alliant BLUE DOT	<<locked>>	76%	33156	90%	**23	90%
Alliant UNIQUE	<<locked>>	62%	33185	90%	**54	100%
Hodgdon TrailBoss	<<locked>>	97%	23061	62%	**44	100%
[Lovex D037.2]*	<<locked>>	65%	33272	90%	**46	86%
Maxam CSB 1	<<locked>>	66%	33141	90%	**52	100%
Maxam CSB 3	<<locked>>	62%	32982	89%	**32	100%
[Ramshot Enforcer]*	<<locked>>	74%	32880	89%	**36	83%
ReloadSwiss RS 14	<<locked>>	97%	22046	60%	**53	100%
ReloadSwiss RS 20	<<locked>>	63%	32837	89%	**31	100%
ReloadSwiss RS 24	<<locked>>	63%	32880	89%	**23	93%
Rottweil P 806	<<locked>>	65%	33228	90%	**26	100%
SNPE Vectan A0	<<locked>>	66%	33214	90%	**11	100%
[SNPE Vectan BA6 1/2]*	<<locked>>	97%	30081	81%	**57	84%
SNPE Vectan BA7 1/2	<<locked>>	69%	32880	89%	**47	100%
[Shooters World Heavy Pistol]*	<<locked>>	65%	33272	90%	**46	86%
Vihtavuori 3N38	<<locked>>	72%	32634	88%	**03	94%
Vihtavuori N105	<<locked>>	77%	33185	90%	**65	97%
[Vihtavuori N110]*	<<locked>>	92%	32924	89%	**39	82%
Vihtavuori N32C Tin Star	<<locked>>	79%	33083	89%	**11	100%
Vihtavuori N340	<<locked>>	62%	33127	90%	**21	100%
Vihtavuori N350	<<locked>>	66%	33127	90%	**67	100%

Max Load - Barrel Length: 5.50''

Powder	Charge	FR	MaxP	%	V(0)	z
ADI AP 100	<<locked>>	61%	22263	60%	**21	93%
ADI APS 450	<<locked>>	61%	31662	86%	**94	100%
[Accurate No. 9]*	<<locked>>	61%	27891	75%	**95	82%
Accurate Solo 1250	<<locked>>	62%	31575	85%	**36	100%
[Accurate TCM]*	<<locked>>	61%	28587	77%	**18	84%
[Alliant 2400]*	<<locked>>	71%	30835	83%	**77	80%
[Alliant BLUE DOT]*	<<locked>>	61%	21422	58%	**24	81%
Alliant UNIQUE	<<locked>>	60%	31589	85%	**14	100%
Hodgdon TrailBoss	<<locked>>	62%	12488	34%	**38	100%
[Lovex D037.2]*	<<locked>>	61%	28805	78%	**14	82%
Maxam CSB 1	<<locked>>	60%	28703	78%	**73	100%
Maxam CSB 3	<<locked>>	60%	31575	85%	**03	100%
[Ramshot Enforcer]*	<<locked>>	70%	29254	79%	**41	80%
ReloadSwiss RS 14	<<locked>>	61%	11792	32%	**38	100%
ReloadSwiss RS 20	<<locked>>	61%	31401	85%	**01	100%
ReloadSwiss RS 24	<<locked>>	61%	30501	82%	**80	92%
Rottweil P 806	<<locked>>	61%	29443	80%	**24	99%
SNPE Vectan A0	<<locked>>	61%	28979	78%	**13	100%
[SNPE Vectan BA6 1/2]*	<<locked>>	91%	25599	69%	**55	80%
SNPE Vectan BA7 1/2	<<locked>>	62%	26818	73%	**22	99%
[Shooters World Heavy Pistol]*	<<locked>>	61%	28805	78%	**14	82%
[Vihtavuori 3N38]*	<<locked>>	61%	23337	63%	**77	88%
[Vihtavuori N105]*	<<locked>>	61%	19783	54%	**04	88%
[Vihtavuori N110]*	<<locked>>	89%	30429	82%	**96	80%
Vihtavuori N32C Tin Star	<<locked>>	61%	22408	61%	**04	100%
Vihtavuori N340	<<locked>>	60%	31604	85%	**88	100%
Vihtavuori N350	<<locked>>	61%	28500	77%	**65	100%

Start Load - Barrel Length: 5.50''

Any powder missing? Then click here.

FR ... fill rate of the cartridge in percent

MaxP ... max. pressure of load in psi or bar

% ... max. pressure of load in percent of the maximum allowed pressure for this caliber

V(0) ... muzzle velocity in feet per second (fps) or meters per second (m/s)

z ... powder burnt in percent

[...] *... not dangerous but load has suboptimal powder burnt with possible characteristics such as extensive muzzle flash or inaccurate loads.

[...] ²... fill rate low - you might want to consider using a filler to ensure proper ignition.

[...] ᴾ... possible press load - work up slowly to this load while watching for signs of excessive pressure.

👍 ... recommended powder/load for this caliber and bullet combination based on its ballistic performance.

<<locked>>... you need to buy an access license to unlock the data